94 sonuçtan 1-32 arası gösteriliyor

  • 0.4/2.5 

    0.4/2.5 & 0.4/2.8 are some of  the smallest true 75 or 50 ohm connector available.  This micro-miniature series is ideal for High Definition camera and CCTV applications […]

  • 1.0/2.3 

    DIN 1.0/2.3 series of RF connectors are available in 50 ohm and 75 ohm versions. These micro miniature connectors are designed to meet the standards IEC […]

  • 10-32 

    10-32 coaxial connector series, also know as Microdot or Series S-50 are a range of small RF connectors similar in size to SMB.  10-32 feature a […]

  • 2 in 1 Laptop Connectors

    Connectors with multiple pins can be used as the interface between tablets and removable keyboards. Magnets can be included to improve the usability. It’s also applicable […]

  • 3D Printing and Rapid Prototyping

    Ideal for development production capable of up to 100 off runs, the 3D printed parts can be made in a range of polymers including ABS and […]

  • Adaptors

    We offer a wide range of adaptors, both inter-series and within series.  Adaptors are of use when changing the interface from male to female, or for […]

  • ATE Connecting Solutions

    To connect a motherboard and a daughterboard in an automatic testing equipment, pogo towers and adapters are usually used. C.C.P. has developed ATE connecting solution for […]

  • Aviation/UAV Battery Pack

    In aviation, the reliable performance of batteries is imperative, being able to withstand frequent changes in temperature or other environmental conditions as well as being light-weight. […]

  • Basic Pogo Pin Intro

    The Pogo-Pin connector is a special type of contact technology that uses a spring inside its barrel to press the tip towards the contact point. In […]

  • Battery for Marine ESS

    Our supplier has developed water cooled Lithium Ion Battery suitable for the marine applications which require extreme safety and reliability under harsh ocean environment. It provides […]

  • Battery Modules (BM)

    Battery Module (KBM) are 2 kWh – 12kWh systems composed of Lithium-ion Batteries connected in series or parallel. With its flexible and modular design, Battery Module […]

  • BNC

    BNC connectors are available in either 50 ohm or 75 ohm options, they feature a simple bayonet coupling requiring only a quarter turn to connect or disconnect. The […]

  • Board Level EMI Shielding Cans

    Effective isolation of board level components and the most cost-effective production method. Being custom made, the cans can be manufactured toincorporate a range of design features […]

  • Bondshield Conductive Silicone Adhesives

    For a variety of RFI/EMI shielding and grounding applications – conductive flexible and structural conductive adhesives.

  • Bondshield Electrically Conductive Epoxy Adhesives – Silver Loaded

    Conductive, high strength, permanent metal to metal bondsideal for assembly of metallic enclosures negating the use of fasteners, welding or machining operations.

  • Burn-In Test Solutions

    The Burn-In test will expose the DUT (divice under test) to harsh conditions: 150°C; relative humidity (RH): 85 rh; current rating: 1A continuous for 1000 hrs. […]

  • Catalogue – IC Testing Probe

    For details; https://www.pccp.com.tw/product_detail.php?type_d=1&PNo=969

  • Cavity Resonance Microwave (RF) Absorbers

    Thin magnetically loaded sheet stock having loss at microwave frequencies while maintaining the desirable characteristics of elastomeric binders. Exhibiting high loss intended to be applied to […]

  • Compression Stops and Collars for Gaskets

    Can be fitted to EMI and environmental gaskets to prevent over-compression or the distortion of mating surfaces with the aim of limitinggasket compressionto between 10% and […]

  • Conductive and Non Conductive Silicone Compounds

    Conductive elastomer and form in place compounds available to purchase and process yourself. With our expertise and in-house compounding facility, we can provide any specification of […]

  • Conductive Copper, Aluminium and Fabric EMI Shielding Tapes

    Copper foil, Aluminium foil, Tinned Copper foil and Nickel over copper metallised synthetic textile yarn tapes.

  • Conductive Metallized Fabrics and Foams

    Extremely flexible and durable with a good resistance to tearing. Uniformly plated throughout its cross-section to provide consistent low resistivity. Particularly resistant to abrasion.

  • Conductive Paints and Coatings

    A range of conductive paints and coatings to suit most requirements and can be applied to most surfaces to provide flexible and hardwearing conductive and antistatic […]

  • Connector Gaskets

    Arange of Connector Gaskets material types. Low and high compression forces, corrosion problems, high temperatures and poor fittings all overcome by appropriate material selection.

  • Connectors for Extreme Environments

    A Glass-to-metal seal is a perfect solution for harsh environments such as polar temperatures, extreme heat or a vacuum because Kovar alloy and glass share the […]

  • Convoluted Foam Absorbers

    A lightweight conductive carbon loaded sheet stock providing broadband reflection loss at microwave frequencies. Exhibiting high reflection loss and intended to be applied to metal surfaces […]

  • Defense Battery Pack

    Lithium Ion batteries are designed and developed to meet the military requirements of high power and high energy density systems with less weight. They are applied […]

  • Din 41626 

    DIN 41626 inserts.  Coaxial connectors used in conjunction with DIN 41612 mixed layout housings.  These inserts are suitable for use up to 1.5GHz Important Note: Do […]

  • Electric Vehicle Battery Pack (XPAND)

    Battery System is designed for use in commercial truck, bus, tram, and heavy duty transportation. The system can be integrated in parallel and in series to […]

  • Electrically Conductive Caulk and Sealant

    Electrically conductive materials comprising of a silicone RTV and conductive particles. Easily applied to panel joints/seams and small clearances.

  • Electrically Conductive Fabric over Foam Gaskets

    Electrically conductive fabric over-foam gasket sections are formed by wrapping a conductive (or metallised) fabric over a foam elastomer core. A synthetic textile yarn uniformly plated […]

1 2 3